Detailed Product Description

1.a strong ultrasonic· I

2.doesnt need rubbing and brushing and doesnt affect fabrics·

3.battery powered with a strong cleaning power·

4.A small volume makes it very portable·

5.easy to operate and can provide an effective result quickly

Ultrasonic Stain Remover

User Manual

Thank you for purchasing this product! Please make sure that you have read the manual carefully before using it.

Features:

1. The ultrasonic stain remover can clean any stains by powerful ultrasonic vibration at 50,000 waves per second.
2. No scrubbing & it wont damage fabrics.
3. Battery powered
4. Compact design so handy for home use or traveling.
5. Simple to use with remarkable results.

Theory:

This Ultrasonic Stain Remover generates 50,000 ultrasonic waves per second which reach deep into any fabric, loosening and removing stains without risk of damage.

General Description:

Directions for use:

Cleaning Garments:

1. Soak the garment in cold water then apply laundry powder or laundry liquid on stain.
2. Press the switch then slowly place the Ultrasonic Stain Remover onto the stain in water.
3. Use the Remover vertically on stains to achieve the best results. Do Not immerse the probe deeper than 2 cm in water (shown as in P-1).
4. Usually it will take 10 to 20 seconds to clean fresh stains. However, it can take much longer to remove older stains.
5. Wipe the unit dry after each use and store it in a cool place away from direct sunlight.

Cleaning Jewellery:

1. Use a non metallic container which allows at least 2cm clearance for water above the jewellery to be cleaned.
2. Place a few pieces at a time into the water.
3. Turn on the unit and slowly move it in the water, being careful not to touch the probe to the jewellery.

Warning:

1. Please keep it away from children.
2. Do not disassemble or repair the unit.
3. Do not clean it with water or any detergent. Wipe it clean after each use.
4. Do not touch the probe when the indicator is on.
5. It must not be used with corrosive or dangerous liquids.
6. Stop using immediately if the unit becomes too hot.
7. Store the unit away from direct sunlight & avoid exposure to high temperatures.

Replacing batteries:

1. Open the back cover and insert 4 AA alkaline batteries correctly.
2. Tighten the back cover.
3. Once the indicator light begins to dim, you will need to replace the batteries soon.